Description
Sol-Ark 12K Pre-Wired Hybrid Inverter System is a all-in-one system that includes an inverter, charger controller, a display with remote monitoring. The Sol-Ark is simple to install to a Grid-tied, Off-Grid, or Battery Backup solar system, while being able to manage power to and from Solar, Battery, Grid, Loads, and Generator.
12K-2P Features:
- Simple to install with touchscreen interface
- Grid Tied Mode: Sell your power to reduce electric bill
- Meter Zero Mode: Zero your electric bill without a smart meter
- Time of Use: Use solar and batteries to minimize grid power usage
- Programmable Smart Load Mode
- DC and AC Coupling
- Works with a wide range of battery chemistries- Lead acid to Lithium
Click for SA-12K Specifications:
Input Data (PV)
Max. Allowed PV Power (STC): 13,000W
Nominal Voltage Range: 175 – 425V
Startup Voltage: 125V
Max. Input Voltage: 500V
Max. Input Current per MPPT: 20A (self-limiting)
No. of MPP Trackers: 2
No. of PV Strings per MPPT: 2
Max. AC Coupled Input: 9,600W
Output Data (AC)
Nominal AC Voltage: 120/240V, 120/208V, 220V
Grid Frequency: 50 / 60Hz
Real Power, max continuous: 9,000W (1)
Max. Output Current: 37.5A
Peak Apparent Power (10s, off-grid): 16,000VA @ 240V
Peak Apparent Power (100ms, off-grid): 25,000VA @ 240V
Max Output Fault Current (100ms): 104A
Max. Grid Passthrough Current: 63A
Power Factor Output Range: +/- 0.9 adjustable
Backup Transfer Time: 4ms
CEC Efficiency: 96.5%
Max Efficiency: 97.5%
Design (DC to AC): Transformerless DC
Stackable: Up to 9 in parallel
Battery Input Data (DC)
Battery Technologies: Lithium / Lead Acid
Nominal DC Voltage: 48V
Operating Voltage Range: 43 – 63V
Capacity: 50 — 9900Ah
Max. Battery Charge / Discharge Current: 185A
Charging Controller: 3-Stage with Equalization
Grid to Battery Charging Efficiency: 96.0%
External Temperature Sensor: Included
Current Shunt for Accurate % SOC: Integrated
Automatic Generator Start: Integrated
Communication to Lithium: CANBus & RS485
General Data
Dimensions (H x W x D): 750 x 450 x 254 mm / 29.5 x 17.7 x 10 in
Weight: 35.4 kg / 78 lb.
Enclosure: IP65 / NEMA 3R
Ambient Temperature: -25~55°C, > 45°C Derating
Noise: < 30 dB
Idle consumption – No Load: 60W
Wi-Fi & LAN Communication: Included
Standard Warranty: 10 Years
Protection and Certifications
Electronics Certified Safety by SGS Labs to NEC & UL Specs – NEC 690.4B & NEC 705.4/6: Yes
Grid Sell Back — UL1741-2010/2018, IEEE1547a 2003/2014, FCC 15 Class B, UL1741SB, CA Rule 21, HECO Rule 14H: Yes
PV DC Disconnect Switch — NEC 240.15: Integrated
Ground Fault Detection — NEC 690.5: Integrated
PV Rapid Shutdown Control — NEC 690.12: Integrated
PV Arc Fault Detection — NEC 690.11: Integrated
PV Input Lightning Protection: Integrated
PV String Input Reverse Polarity Protection: Integrated
AC Output Breaker – 63A: Integrated
250A Battery Breaker / Disconnect: Integrated
Surge Protection: DC Type II / AC Type II
Standard Included
- (1) RUiXU Lithi2-16
- (1) RS485 Communication Cable
- (1) Ground Cable
- (1) Set of parallel 1/0 AWG OP140 Cable
Lithi2-16
- Nominal voltage: 51.2V
- Nominal [email protected]: 314 Ah
- Min. [email protected]: 314 Ah
- Nominal energy: 16.07kWh
- Dimension(W*D*H): 924(with wheels)*543*250mm | 36.3(with wheels)*21.3*10inch
- Weight: ~145kg (320lb)
- Cycle life@80% DOD: ≥9500 cycles
COMMUNICATIONS:
- Canbus: Victron, SMA, Studer Innotec, Sofar, Solark, Solis, Goodwe, Deye, Growatt, SAJ, LUXPOWER, Megarevo, INVT, Sermatec, TBB, MUST, Sunsynk, Schneider
- RS485: MPP, Voltronic, RCT, Alpha outback
ON-BOARD LCD TOUCH SCREEN
5-inch capacitive touch screen provides battery information and allows easy and intuitive adjustment of battery settings.
PERFLUOROHEXANE MODULE
A perfluorohexane module improves fire protection inside the battery pack to both electrical lines and cells.
QUICK PLUGS
Quick plugs provide 250A (continuous) overcurrent capacity, easy tool-less connection, long-term anti-loosening and heating protection.
FUMA WHEELS AND WALL MOUNTED FIXATION
Four concealed heavy-duty Fuma wheels facilitate movement of the battery without detracting from the elegant design. An anti-tipping mount on the back anchors the battery to the wall.
BATTERY MAINTENACE AND INSPECTION PORT
An inspection port on the side of the battery provides access to the BMS and fuse for ease of maintenance.
ALL POLE PROTECTION
All-pole, dual protection through fuse (negative terminal) and micro circuit breaker (positive terminal).
INTELLIGENT BALANCING
A double equilibrium approach achieves efficient cell balancing by calculating capacity differences between battery cells from charging-process data and by extending the balancing time, improving the efficiency and reliability compared to general passive and active balancing modes.
SELF-HEATING FEATURE
Keeping your battery charged in cold temperatures.
ELECTRO-COATING BATTERY CASE FOR OUTDOOR USE
Electro-coating (electrophoresis) of the battery enclosure provides excellent rust prevention for outdoor use. The electrophoretic coating process is widely used in the production of automotive body shells.
Black Friday Sol-Ark RUIXU Bundle – 12K-2P Hybrid Inverter Lithi2-16 51.2V314Ah 16kWh LiFePO4 Battery Energy Storage
