Description
Sol-Ark 12K Pre-Wired Hybrid Inverter System is a all-in-one system that includes an inverter, charger controller, a display with remote monitoring. The Sol-Ark is simple to install to a Grid-tied, Off-Grid, or Battery Backup solar system, while being able to manage power to and from Solar, Battery, Grid, Loads, and Generator.
12K-2P Features:
- Simple to install with touchscreen interface
- Grid Tied Mode: Sell your power to reduce electric bill
- Meter Zero Mode: Zero your electric bill without a smart meter
- Time of Use: Use solar and batteries to minimize grid power usage
- Programmable Smart Load Mode
- DC and AC Coupling
- Works with a wide range of battery chemistries- Lead acid to Lithium
Click for SA-12K Specifications:
Input Data (PV)
Max. Allowed PV Power (STC): 13,000W
Nominal Voltage Range: 175 – 425V
Startup Voltage: 125V
Max. Input Voltage: 500V
Max. Input Current per MPPT: 20A (self-limiting)
No. of MPP Trackers: 2
No. of PV Strings per MPPT: 2
Max. AC Coupled Input: 9,600W
Output Data (AC)
Nominal AC Voltage: 120/240V, 120/208V, 220V
Grid Frequency: 50 / 60Hz
Real Power, max continuous: 9,000W (1)
Max. Output Current: 37.5A
Peak Apparent Power (10s, off-grid): 16,000VA @ 240V
Peak Apparent Power (100ms, off-grid): 25,000VA @ 240V
Max Output Fault Current (100ms): 104A
Max. Grid Passthrough Current: 63A
Power Factor Output Range: +/- 0.9 adjustable
Backup Transfer Time: 4ms
CEC Efficiency: 96.5%
Max Efficiency: 97.5%
Design (DC to AC): Transformerless DC
Stackable: Up to 9 in parallel
Battery Input Data (DC)
Battery Technologies: Lithium / Lead Acid
Nominal DC Voltage: 48V
Operating Voltage Range: 43 – 63V
Capacity: 50 — 9900Ah
Max. Battery Charge / Discharge Current: 185A
Charging Controller: 3-Stage with Equalization
Grid to Battery Charging Efficiency: 96.0%
External Temperature Sensor: Included
Current Shunt for Accurate % SOC: Integrated
Automatic Generator Start: Integrated
Communication to Lithium: CANBus & RS485
General Data
Dimensions (H x W x D): 750 x 450 x 254 mm / 29.5 x 17.7 x 10 in
Weight: 35.4 kg / 78 lb.
Enclosure: IP65 / NEMA 3R
Ambient Temperature: -25~55°C, > 45°C Derating
Noise: < 30 dB
Idle consumption – No Load: 60W
Wi-Fi & LAN Communication: Included
Standard Warranty: 10 Years
Protection and Certifications
Electronics Certified Safety by SGS Labs to NEC & UL Specs – NEC 690.4B & NEC 705.4/6: Yes
Grid Sell Back — UL1741-2010/2018, IEEE1547a 2003/2014, FCC 15 Class B, UL1741SB, CA Rule 21, HECO Rule 14H: Yes
PV DC Disconnect Switch — NEC 240.15: Integrated
Ground Fault Detection — NEC 690.5: Integrated
PV Rapid Shutdown Control — NEC 690.12: Integrated
PV Arc Fault Detection — NEC 690.11: Integrated
PV Input Lightning Protection: Integrated
PV String Input Reverse Polarity Protection: Integrated
AC Output Breaker – 63A: Integrated
250A Battery Breaker / Disconnect: Integrated
Surge Protection: DC Type II / AC Type II
RUiXU battery packs are rack type residential lithium batteries, designed entirely for residential ESS applications. With RUiXU’s battery technology, you can easily combine it with a mainstream inverter in different scenarios to save your electrical bill & back up your power during grid outage or off-grid application.
Support up to 32 units in parallel, scale from 5 kWh to 160 kWh configuration without external controller.
3U (133mm) standard height design
Use DIP address to set the RS485 baud rate and inverter protocol choosing
Comes with battery interconnection Amphenol connectors.
Click for RX-LFP48100 Specifications
Rated voltage: 51.2V
Max. voltage range: 44.8~57.6V, Shipping voltage>51.2V
Charge voltage: 56.0V
Float charge voltage: 54.6V
Low voltage cut-off: 44.8V
Nominal energy: 5.12KWh
Usable energy: 4.92kWh
Nominal capacity: 100Ah
Dimensions: 482*133.5*460mm (18.9*5.2*18.1 inch)
Weight: ~50kg (110lbs)
Standard charge current: ≤50A
Max. charge current: 70A
Standard discharge current: ≤50A
Max. discharge current: 100A (initial temp. ≤35℃ [95°F])
Peak discharge current: 101~119A@5mins | 120~150A@5S
Communication: RS485 /CAN
Max parallel number: 32pcs
Operation temperature1 Charge: 0~50℃ (32~122°F)
Discharge: -20~50℃ (-4~122°F)
Storage temperature: 0℃<T<30℃ (32°F<T<86°F)＜6 months | -10℃<T<45℃ (14°F<T<113°F)＜3 months
Recommended environment: 15~35℃ (59~95°F), 5~75%RH
(1) The optimum operating temperature range is from 15°C to 30°C (15°F to 86°F). Frequent exposure to the harsh
temperatures may worsen the performance of the battery pack and cycle life.
Modular
Support up to 32 units in parallel, scale from 5 kWh to 160 kWh configuration without external controller.
Inverter Protocol Choosing
Use DIP address to set the RS485 baud rate and inverter protocol choosing
Communications
Canbus: Victron, SMA, Studer Innotec, Sofar, Solark, Solis, Goodwe, Deye, Growatt, SAJ, LUXPOWER, Megarevo, INVT, Sermatec, TBB, MUST, Sunsynk, Schneider
RS485: MPP, Voltronic, RCT, Alpha outback
Standard Included
(1) RUiXU 48V Server Rack battery (RX-LFP48100)
(1) RS485 Communication Cable
(1) Ground Cable
(1) Set of Parallel 4AWG Cables per battery
Black Friday Sol-Ark RUIXU Bundle – 12K-2P Hybrid Inverter RX-LFP48100 Server Rack Battery
